|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | COLOPHON |
|
|
|
ARIA_CHK(1) User Commands ARIA_CHK(1)
aria_chk - Aria table-maintenance utility
aria_chk [OPTIONS] tables[.MAI]
Describe, check and repair of Aria tables. Used without options
all tables on the command will be checked for errors
Global options
-#, --debug=...
Output debug log. Often this is 'd:t:o,filename'.
-H, --HELP
Print all argument options sorted alphabetically.
-?, --help
Print all options by groups
--datadir=path
Path for control file (and logs if --logdir not used)
--logdir=path
Path for log files
--ignore-control-file
Don't open the control file. Only use this if you are sure
the tables are not in use by another program!
--require-control-file
Abort if we can't find/read the maria_log_control file
-s, --silent
Only print errors. One can use two -s to make maria_chk
very silent.
-t, --tmpdir=path
Path for temporary files. Multiple paths can be specified,
separated by colon (:), they will be used in a round-robin
fashion.
-v, --verbose
Print more information. This can be used with
--description and --check. Use many -v for more verbosity.
-V, --version
Print version and exit.
-w, --wait
Wait if table is locked.
Check options (check is the default action for aria_chk)
-c, --check
Check table for errors.
-e, --extend-check
Check the table VERY thoroughly. Only use this in extreme
cases as aria_chk should normally be able to find out if
the table is ok even without this switch.
-F, --fast
Check only tables that haven't been closed properly.
-C, --check-only-changed
Check only tables that have changed since last check.
-f, --force
Restart with '-r' if there are any errors in the table.
States will be updated as with '--update-state'.
-i, --information
Print statistics information about table that is checked.
-m, --medium-check
Faster than extend-check, but only finds 99.99% of all
errors. Should be good enough for most cases.
-T, --read-only
Don't mark table as checked.
-U, --update-state
Mark tables as crashed if any errors were found and clean
if check didn't find any errors but table was marked as
'not clean' before. This allows one to get rid of warnings
like 'table not properly closed'. If table was updated,
update also the timestamp for when the check was made.
This option is on by default! Use --skip-update-state to
disable.
--warning-for-wrong-transaction-id
Give a warning if we find a transaction id in the table
that is bigger than what exists in the control file. Use
--skip-... to disable warning
Recover (repair)/ options (When using '--recover' or '--safe-
recover')
-B, --backup
Make a backup of the .MAD file as 'filename-time.BAK'.
--correct-checksum
Correct checksum information for table.
-D, --data-file-length=#
Max length of data file (when recreating data file when
it's full).
-e, --extend-check
Try to recover every possible row from the data file
Normally this will also find a lot of garbage rows; Don't
use this option if you are not totally desperate.
-f, --force
Overwrite old temporary files.
-k, --keys-used=#
Tell Aria to update only some specific keys. # is a bit
mask of which keys to use. This can be used to get faster
inserts.
--max-record-length=#
Skip rows bigger than this if aria_chk can't allocate
memory to hold it.
-r, --recover
Can fix almost anything except unique keys that aren't
unique.
-n, --sort-recover
Forces recovering with sorting even if the temporary file
would be very big.
-p, --parallel-recover
Uses the same technique as '-r' and '-n', but creates all
the keys in parallel, in different threads.
-o, --safe-recover
Uses old recovery method; Slower than '-r' but can handle
a couple of cases where '-r' reports that it can't fix the
data file.
--transaction-log
Log repair command to transaction log. This is needed if
one wants to use the aria_read_log to repeat the repair
--character-sets-dir=...
Directory where character sets are.
--set-collation=name
Change the collation used by the index.
-q, --quick
Faster repair by not modifying the data file. One can
give a second '-q' to force aria_chk to modify the
original datafile in case of duplicate keys. NOTE: Tables
where the data file is corrupted can't be fixed with this
option.
-u, --unpack
Unpack file packed with ariapack.
Other actions
-a, --analyze
Analyze distribution of keys. Will make some joins in
MariaDB faster. You can check the calculated distribution
by using '--description --verbose table_name'.
--stats_method=name
Specifies how index statistics collection code should
treat NULLs. Possible values of name are "nulls_unequal"
(default for 4.1/5.0), "nulls_equal" (emulate 4.0), and
"nulls_ignored".
-d, --description
Prints some information about table.
-A, --set-auto-increment[=value]
Force auto_increment to start at this or higher value If
no value is given, then sets the next auto_increment value
to the highest used value for the auto key + 1.
-S, --sort-index
Sort index blocks. This speeds up 'read-next' in
applications.
-R, --sort-records=#
Sort records according to an index. This makes your data
much more localized and may speed up things (It may be
VERY slow to do a sort the first time!).
-b, --block-search=#
Find a record, a block at given offset belongs to.
-z, --zerofill
Fill empty space in data and index files with zeroes.
This makes the data file movable between different
servers.
--zerofill-keep-lsn
Like --zerofill but does not zero out LSN of data/index
pages.
Variables
--page_buffer_size=#
Size of page buffer. Used by --safe-repair
--read_buffer_size=#
Read buffer size for sequential reads during scanning
--sort_buffer_size=#
Size of sort buffer. Used by --recover
--sort_key_blocks=#
Internal buffer for sorting keys; Don't touch.
--write_buffer_size=#
Write buffer size for sequential writes during repair
Default options are read from the following files in the given
order: /etc/my.cnf /etc/mysql/my.cnf ~/.my.cnf
The following groups are read: aria_chk
The following options may be given as the first argument:
--print-defaults
Print the program argument list and exit.
--no-defaults
Don't read default options from any option file.
--defaults-file=#
Only read default options from the given file #.
--defaults-extra-file=#
Read this file after the global files are read.
myisamchk(1)
For more information, please refer to the MariaDB Knowledge Base,
available online at https://mariadb.com/kb/
This page is part of the MariaDB (MariaDB database server)
project. Information about the project can be found at
⟨http://mariadb.org/⟩. If you have a bug report for this manual
page, see ⟨https://mariadb.com/kb/en/mariadb/reporting-bugs/⟩.
This page was obtained from the project's upstream Git repository
⟨https://github.com/MariaDB/server⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2023-05-11.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
aria_chk Ver 1.2 May 2014 ARIA_CHK(1)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|