|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | LIMITATIONS | SEE ALSO | AUTHOR | ACKNOWLEDGEMENTS | COLOPHON |
|
|
|
LDAPCOMPARE(1) General Commands Manual LDAPCOMPARE(1)
ldapcompare - LDAP compare tool
ldapcompare [-V[V]] [-d debuglevel] [-n] [-v] [-z] [-M[M]] [-x]
[-D binddn] [-W] [-w passwd] [-y passwdfile] [-H ldapuri]
[-P {2|3}] [-e [!]ext[=extparam]] [-E [!]ext[=extparam]]
[-o opt[=optparam]] [-O security-properties] [-I] [-Q] [-N]
[-U authcid] [-R realm] [-X authzid] [-Y mech] [-Z[Z]] DN
{attr:value | attr::b64value}
ldapcompare is a shell-accessible interface to the
ldap_compare_ext(3) library call.
ldapcompare opens a connection to an LDAP server, binds, and
performs a compare using specified parameters. The DN should be
a distinguished name in the directory. Attr should be a known
attribute. If followed by one colon, the assertion value should
be provided as a string. If followed by two colons, the base64
encoding of the value is provided. The result code of the
compare is provided as the exit code and, unless ran with -z, the
program prints TRUE, FALSE, or UNDEFINED on standard output.
-V[V] Print version info. If -VV is given, only the version
information is printed.
-d debuglevel
Set the LDAP debugging level to debuglevel. ldapcompare
must be compiled with LDAP_DEBUG defined for this option
to have any effect.
-n Show what would be done, but don't actually perform the
compare. Useful for debugging in conjunction with -v.
-v Run in verbose mode, with many diagnostics written to
standard output.
-z Run in quiet mode, no output is written. You must check
the return status. Useful in shell scripts.
-M[M] Enable manage DSA IT control. -MM makes control critical.
-x Use simple authentication instead of SASL.
-D binddn
Use the Distinguished Name binddn to bind to the LDAP
directory. For SASL binds, the server is expected to
ignore this value.
-W Prompt for simple authentication. This is used instead of
specifying the password on the command line.
-w passwd
Use passwd as the password for simple authentication.
-y passwdfile
Use complete contents of passwdfile as the password for
simple authentication. Note that complete means that any
leading or trailing whitespaces, including newlines, will
be considered part of the password and, unlike other
software, they will not be stripped. As a consequence,
passwords stored in files by commands like echo(1) will
not behave as expected, since echo(1) by default appends a
trailing newline to the echoed string. The recommended
portable way to store a cleartext password in a file for
use with this option is to use slappasswd(8) with
{CLEARTEXT} as hash and the option -n.
-H ldapuri
Specify URI(s) referring to the ldap server(s); only the
protocol/host/port fields are allowed; a list of URI,
separated by whitespace or commas is expected.
-P {2|3}
Specify the LDAP protocol version to use.
-e [!]ext[=extparam]
-E [!]ext[=extparam]
Specify general extensions with -e and compare extensions
with -E. ´!´ indicates criticality.
General extensions:
[!]assert=<filter> (an RFC 4515 Filter)
!authzid=<authzid> ("dn:<dn>" or "u:<user>")
[!]bauthzid (RFC 3829 authzid control)
[!]chaining[=<resolve>[/<cont>]]
[!]manageDSAit
[!]noop
ppolicy
[!]postread[=<attrs>] (a comma-separated attribute list)
[!]preread[=<attrs>] (a comma-separated attribute list)
[!]relax
sessiontracking[=<username>]
abandon,cancel,ignore (SIGINT sends abandon/cancel,
or ignores response; if critical, doesn't wait for SIGINT.
not really controls)
Compare extensions:
!dontUseCopy
-o opt[=optparam]
Specify any ldap.conf(5) option or one of the following:
nettimeout=<timeout> (in seconds, or "none" or "max")
ldif_wrap=<width> (in columns, or "no" for no wrapping)
-O security-properties
Specify SASL security properties.
-I Enable SASL Interactive mode. Always prompt. Default is
to prompt only as needed.
-Q Enable SASL Quiet mode. Never prompt.
-N Do not use reverse DNS to canonicalize SASL host name.
-U authcid
Specify the authentication ID for SASL bind. The form of
the ID depends on the actual SASL mechanism used.
-R realm
Specify the realm of authentication ID for SASL bind. The
form of the realm depends on the actual SASL mechanism
used.
-X authzid
Specify the requested authorization ID for SASL bind.
authzid must be one of the following formats:
dn:<distinguished name> or u:<username>
-Y mech
Specify the SASL mechanism to be used for authentication.
If it's not specified, the program will choose the best
mechanism the server knows.
-Z[Z] Issue StartTLS (Transport Layer Security) extended
operation. If you use -ZZ, the command will require the
operation to be successful.
ldapcompare "uid=babs,dc=example,dc=com" sn:Jensen
ldapcompare "uid=babs,dc=example,dc=com" sn::SmVuc2Vu
are all equivalent.
Requiring the value be passed on the command line is limiting and
introduces some security concerns. The command should support a
mechanism to specify the location (file name or URL) to read the
value from.
ldap.conf(5), ldif(5), ldap(3), ldap_compare_ext(3)
The OpenLDAP Project <http://www.openldap.org/>
OpenLDAP Software is developed and maintained by The OpenLDAP
Project <http://www.openldap.org/>. OpenLDAP Software is derived
from the University of Michigan LDAP 3.3 Release.
This page is part of the OpenLDAP (an open source implementation
of the Lightweight Directory Access Protocol) project.
Information about the project can be found at
⟨http://www.openldap.org/⟩. If you have a bug report for this
manual page, see ⟨http://www.openldap.org/its/⟩. This page was
obtained from the project's upstream Git repository
⟨https://git.openldap.org/openldap/openldap.git⟩ on 2024-06-14.
(At that time, the date of the most recent commit that was found
in the repository was 2024-06-13.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
OpenLDAP LDVERSION RELEASEDATE LDAPCOMPARE(1)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|