|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMAND LANGUAGE | EXAMPLES | FILES | ENVIRONMENT | PCP ENVIRONMENT | SEE ALSO | COLOPHON |
|
|
|
PMIECONF(1) General Commands Manual PMIECONF(1)
pmieconf - display and set configurable pmie rule variables
pmieconf [-cFv?] [-f file] [-r rulepath] [command [args...]]
pmieconf is a utility for viewing and configuring variables from
generalized pmie(1) rules. The set of generalized rules is read
in from rulepath, and the output file produced by pmieconf is a
valid input file for pmie.
The available command line options are:
-c When run from automated pmie setup processes, this option is
used to add a specific message and timestamp indicating that
this is the case. Unless over-ridden by the -f flag, the
default configuration file to be written or updated when the
-c flag is given and pmieconf is run by the root user, is
$PCP_VAR_DIR/config/pmie/config.default. This is also the
default configuration file used by the pmie service, see
pmie_daily(1). This flag is not appropriate when using the
tool interactively.
-f file, --config=file
Any rule modifications resulting from pmieconf manipulation
of variable values will be written to file. The default
value of file is dependent on the user ID - for the root
user (when the -c flag is not also given, see above) the
file is $PCP_SYSCONF_DIR/pmie/config.default. For other
users the default is $HOME/.pcp/pmie/config.pmie.
-F, --force
Forces the pmieconf output file to be created (or updated),
after which pmieconf immediately exits.
-r rulepath, --rules=rulepath
Allows the source of generalized pmie rules to be changed -
rulepath is a colon-delimited list of pmieconf(5) rule files
and/or subdirectories. The default value for rulepath is
$PCP_VAR_DIR/config/pmieconf. Use of this option overrides
the PMIECONF_PATH environment variable which has a similar
function.
-v, --verbose
Enable verbose mode. associated variables will be
displayed. This is the complete list of variables which
affects any given rule (by default, global variables are not
displayed with the rule).
-?, --help
Display usage message and exit.
The pmieconf commands allow information related to the various
rules and configurable variables to be displayed or modified. If
no pmieconf commands are presented on the command line, pmieconf
prompts for commands interactively.
The pmieconf command language is described here:
help [ { . | all | global | <rule> | <group> } [<variable>] ]
Without arguments, the help command displays the syntax
for all of the available pmieconf commands. With one
argument, a description of one or more of the generalized
rules is displayed. With two arguments, a description of
a specific variable relating to one or more of the
generalized rules is displayed.
rules [ enabled | disabled ]
Display the name and short summary for all of the
generalized rules found on rulepath. Each of the rule
names can be used in place of the keyword <rule> in this
command syntax description. The enabled and disabled
options can be used to filter the set of rules displayed
to just those which are enabled or disabled respectfully.
groups Display the name of all of the rule groups that were
found on rulepath. Each of the group names can be used
in place of the keyword <group> in this command syntax
description, which applies the command to all rules
within the rule group.
status Display status information relating to the current
pmieconf session, including a list of running pmie
processes which are currently using file.
enable { . | all | <rule> | <group> }
Enables the specified rule or group of rules. An enabled
rule is one which will be included in the pmie
configuration file generated by pmieconf. Any enabled
"actions" will be appended to the rule's "predicate", in
a manner conforming to the pmie syntax ("actions" can be
viewed using the list global command, described below).
disable { . | all | <rule> | <group> }
Disables the specified rule or group of rules. If the
rule was previously enabled, it will be removed from the
pmie configuration file generated by pmieconf, and hence
no longer evaluated when pmie is restarted (using
pmieconf does not affect any existing pmie processes
using file).
list { . | all | global | <rule> | <group> } [<variable>]
Display the values for a specific rule variable; or for
all variables of a rule, a rule group, all rules, or the
global variables.
modify { . | all | global | <rule> | <group> } <variable>
<value>
Enable, disable, or otherwise change the value for one or
more rule variables. This value must be consistent with
the type of the variable, which can be inferred from the
format of the printed value - e.g. strings will be
enclosed in double-quotes, percentages have the ``%''
symbol appended, etc. Note that certain rule variables
cannot be modified through pmieconf - "predicate" and
"help", for example.
undo { . | all | global | <rule> | <group> } [<variable>]
Applicable only to a variable whose value has been
modified - this command simply reverts to the default
value for the given variable.
quit Save any changes made to file and then exit pmieconf.
abort Exit pmieconf immediately without saving any changes to
file.
Each of the commands above can be shortened by simply using the
first character of the command name, and also ``?'' for help.
Use of the all keyword causes the command to be applied to all of
the rules. The global keyword refers to those variables which
are applied to every rule. Such variables can be changed either
globally or locally, for example:
pmieconf> modify global delta "5 minutes"
pmieconf> modify memory delta "1 minute"
causes all rules to now be evaluated once every five minutes,
except for rules in the "memory" group which are to be evaluated
once per minute.
The ``.'' character is special to pmieconf - it refers to the
last successfully used value of all, global, <rule> or <group>.
Specify that all of the rules in the "memory" group should be
evaluated:
pmieconf> modify memory enabled yes
Change your mind, and revert to using only the "memory" rules
which were enabled by default:
pmieconf> undo memory enabled
Specify that notification of rules which evaluate to true should
be sent to syslogd(1):
pmieconf> modify global syslog_action yes
Specify that rules in the "per_cpu" group should use a different
holdoff value to other rules:
pmieconf> help global holdoff
rule: global [generic parameters applied to all rules]
var: holdoff
help: Once the predicate is true and the action is executed,
this variable allows suppression of further action
execution until the specified interval has elapsed.
A value of zero enables execution of the action if
the rule predicate is true at the next sample. Default
units are seconds and common units are "second", "sec",
"minute", "min" and "hour".
pmieconf> modify per_cpu holdoff "1 hour"
Lower the threshold associated with a particular variable for a
specified rule:
pmieconf> l cpu.syscall predicate
rule: cpu.syscall [High aggregate system call rate]
predicate =
some_host (
( kernel.all.syscall $hosts$ )
> $threshold$ count/sec * hinv.ncpu $hosts$
)
pmieconf> m . threshold 7000
pmieconf> l . threshold
rule: cpu.syscall [High aggregate system call rate]
threshold = 7000
$PCP_VAR_DIR/config/pmieconf/*/*
generalized system resource monitoring rules
$PCP_SYSCONF_DIR/pmie/config.pmie
default super-user settings for system resource monitoring
rules
$HOME/.pcp/pmie/config.pmie
default user settings for system resource monitoring rules
The environment variable PMIECONF_PATH has a similar function to
the -r option described above, and if set will be used provided
no -r option is presented.
Environment variables with the prefix PCP_ are used to
parameterize the file and directory names used by PCP. On each
installation, the file /etc/pcp.conf contains the local values
for these variables. The $PCP_CONF variable may be used to
specify an alternative configuration file, as described in
pcp.conf(5).
PCPIntro(1), pmie(1), pmie_check(1) and pmieconf(5).
This page is part of the PCP (Performance Co-Pilot) project.
Information about the project can be found at
⟨http://www.pcp.io/⟩. If you have a bug report for this manual
page, send it to pcp@groups.io. This page was obtained from the
project's upstream Git repository
⟨https://github.com/performancecopilot/pcp.git⟩ on 2024-06-14.
(At that time, the date of the most recent commit that was found
in the repository was 2024-06-14.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Performance Co-Pilot PCP PMIECONF(1)
Pages that refer to this page: pcpintro(1), pmie(1), pmie_check(1), pmieconf(5)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|