|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | REWRITING RULES SYNTAX | EXAMPLES | DIAGNOSTICS | FILES | PCP ENVIRONMENT | SEE ALSO | COLOPHON |
|
|
|
PMLOGREWRITE(1) General Commands Manual PMLOGREWRITE(1)
pmlogrewrite - rewrite Performance Co-Pilot archives
pmlogrewrite [-Cdiqsvw?] [-c config] [-V version] inlog [outlog]
pmlogrewrite reads a set of Performance Co-Pilot (PCP) archives
identified by inlog and creates a PCP archive in outlog. Under
normal usage, the -c option will be used to nominate a
configuration file or files that contains specifications (see the
REWRITING RULES SYNTAX section below) that describe how the data
and metadata from inlog should be transformed to produce outlog.
The typical uses for pmlogrewrite would be to accommodate the
evolution of Performance Metric Domain Agents (PMDAs) where the
names, metadata and semantics of metrics and their associated
instance domains may change over time, e.g. promoting the type of
a metric from a 32-bit to a 64-bit integer, or renaming a group
of metrics. Refer to the EXAMPLES section for some additional
use cases.
pmlogrewrite may also be used to redact sensitive information
from PCP archives in situations where the archives need to be
shipped to another organization or to meet privacy policies or
legislative requirements. See pmlogredact(1) for an example use
of pmlogrewrite in this context.
pmlogrewrite is most useful where PMDA changes, or errors in the
production environment, result in archives that cannot be
combined with pmlogextract(1). By pre-processing the archives
with pmlogrewrite the resulting archives may be able to be merged
with pmlogextract(1).
The input inlog must be a set of PCP archives created by
pmlogger(1), or possibly one of the tools that read and create
PCP archives, e.g. pmlogextract(1) and pmlogreduce(1). inlog is
a comma-separated list of names, each of which may be the base
name of an archive or the name of a directory containing one or
more archives.
If no -c option is specified, then the default behavior simply
creates outlog as a copy of inlog. This is a little more
complicated than cat(1), as each PCP archive is made up of
several physical files.
While pmlogrewrite may be used to repair some data consistency
issues in PCP archives, there is also a class of repair tasks
that cannot be handled by pmlogrewrite and pmloglabel(1) may be a
useful tool in these cases.
The available command line options are:
-c config, --config=config
If config is a file or symbolic link, read and parse
rewriting rules from there. If config is a directory, then
all of the files or symbolic links in that directory
(excluding those beginning with a period ``.'') will be used
to provide the rewriting rules. Multiple -c options are
allowed.
-C, --check
Parse the rewriting rules and quit. outlog is not created,
so this command line argument is optional with -C. When -C
is specified, this also sets -v and -w so that all warnings
and verbose messages are displayed as config is parsed.
-d, --desperate
Desperate mode. Normally if a fatal error occurs, all trace
of the partially written PCP archive outlog is removed.
With the -d option, the partially created outlog archive is
not removed.
-i Rather than creating outlog, inlog is rewritten in place
when the -i option is used. A new archive is created using
temporary file names and then renamed to inlog in such a way
that if any errors (not warnings) are encountered, inlog
remains unaltered.
-q, --quick
Quick mode, where if there are no rewriting actions to be
performed (none of the global data, instance domains or
metrics from inlog will be changed), then pmlogrewrite will
exit (with status 0, so success) immediately after parsing
the configuration file(s) and outlog is not created.
-s, --scale
When the ``units'' of a metric are changed, if the dimension
in terms of space, time and count is unaltered, then the
scaling factor is being changed, e.g. BYTE to KBYTE, or
MSEC-1 to USEC-1, or the composite MBYTE.SEC-1 to
KBYTE.USEC-1. The motivation may be (a) that the original
metadata was wrong but the values in inlog are correct, or
(b) the metadata is changing so the values need to change as
well. The default pmlogrewrite behaviour matches case (a).
If case (b) applies, then use the -s option and the values
of all the metrics with a scale factor change in each result
will be rescaled. For finer control over value rescaling
refer to the RESCALE option for the UNITS clause of the
metric rewriting rule described below.
-v, --verbose
Enable verbose mode.
-V version, --version=version
Specifies the version of the output PCP archive being
produced. Currently versions 2 and 3 of the archive format
is supported. The version of inlog must be at least version
(so version upgrade is allowed, but version downgrade is
not). By default, in the absence of the -V option, the
version of outlog is the same as the version of inlog.
-w, --warnings
Emit warnings. Normally pmlogrewrite remains silent for any
warning that is not fatal and it is expected that for a
particular archive, some (or indeed, all) of the rewriting
specifications may not apply. For example, changes to a
PMDA may be captured in a set of rewriting rules, but a
single archive may not contain all of the modified metrics
nor all of the modified instance domains and/or instances.
Because these cases are expected, they do not prevent
pmlogrewrite executing, and rules that do not apply to inlog
are silently ignored by default. Similarly, some rewriting
rules may involve no change because the metadata in inlog
already matches the intent of the rewriting rule to correct
data from a previous version of a PMDA. The -w flag forces
warnings to be emitted for all of these cases.
-?, --help
Display usage message and exit.
The argument outlog is required in all cases, except when -i is
specified.
A configuration file contains zero or more rewriting rules as
defined below.
Keywords and special punctuation characters are shown below in
bolditalic font and are case-insensitive, so METRIC, metric and
Metric are all equivalent in rewriting rules.
The character ``#'' introduces a comment and the remainder of the
line is ignored. Otherwise the input is relatively free format
with optional white space (spaces, tabs or newlines) between
lexical items in the rules.
A global rewriting rule has the form:
GLOBAL { globalspec ... }
where globalspec is zero or more of the following clauses:
HOSTNAME -> hostname
Modifies the label records in the outlog PCP archive, so
that the metrics will appear to have been collected from
the host hostname.
TIME -> delta
Both metric values and the instance domain metadata in a
PCP archive carry timestamps. This clause forces all the
timestamps to be adjusted by delta, where delta is an
optional sign ``+'' (the default) or ``-'', an optional
number of hours followed by a colon ``:'', an optional
number of minutes followed by a colon ``:'', a number of
seconds, an optional fraction of seconds following a
period ``.''. The simplest example would be ``30'' to
increase the timestamps by 30 seconds. A more complex
example would be ``-23:59:59.999'' to move the timestamps
backwards by one millisecond less than one day.
TIMEZONE -> "timezone"
TZ -> "timezone"
Modifies the label records in the outlog PCP archive, so
that the metrics will appear to have been collected from
a host with a local timezone of timezone. timezone must
be enclosed in double quotes, and should conform to the
valid timezone syntax rules for the local platform,
usually a Posix TZ format, e.g. AEST-10. See tzset(3)
for more information.
TZ is an alias for TIMEZONE.
ZONEINFO -> "zoneinfo"
Modifies the label records in the outlog PCP archive, so
that the metrics will appear to have been collected from
a host with a local timezone of zoneinfo. zoneinfo must
be enclosed in double quotes, and should conform to the
valid zoneinfo timezone syntax rules for the local
platform, usually a colon followed by a pathname below
/usr/share/zoneinfo, e.g. :Africa/Timbuktu. See tzset(3)
for more information.
The zoneinfo clause is only allowed if the output archive
version is at least 3.
FEATURES -> feature-bits
Modifies the label records in the outlog PCP archive, so
that the metrics will appear to have been collected from
system with a pmlogger(1) that supports the ``features''
defined by the integer value feature-bits, which is
formed by ``or''ing the desired feature flags as defined
in LOGARCHIVE(5). Alternatively, feature-bits can be
specified using the ``macro'' BITS() that takes a comma
separated argument list of integers (in the inclusive
range 0 to 31) and sets the corresponding bits. For
example
features -> bits(31,7,1)
The features clause is only allowed if the output archive
version is at least 3.
An indom rewriting rule modifies an instance domain and has the
form:
INDOM domain.serial { indomspec ... }
where domain and serial identify one or more existing instance
domains from inlog - typically domain would be an integer in the
range 1 to 510 and serial would be an integer in the range 0 to
4194304.
As a special case serial could be an asterisk ``*'' which means
the rule applies to every instance domain with a domain number of
domain.
If a designated instance domain is not in inlog the rule has no
effect.
The indomspec is zero or more of the following clauses:
INAME "oldname" -> "newname"
The instance identified by the external instance name
oldname is renamed to newname. Both oldname and newname
must be enclosed in double quotes.
As a special case, the new name may be the keyword DELETE
(with no double quotes), and then the instance oldname
will be expunged from outlog which removes it from the
instance domain metadata and removes all values of this
instance for all the associated metrics.
If the instance names contain any embedded spaces then
special care needs to be taken in respect of the PCP
instance naming rule that treats the leading non-space
part of the instance name as the unique portion of the
name for the purposes of matching and ensuring uniqueness
within an instance domain, refer to pmdaInstance(3) for a
discussion of this issue.
As an illustration, consider the hypothetical instance
domain for a metric which contains 2 instances with the
following names:
red
eek urk
Then some possible INAME clauses might be:
"eek" -> "yellow like a flower"
Acceptable, oldname "eek" matches the "eek urk"
instance.
"red" -> "eek"
Error, newname "eek" matches the existing "eek
urk" instance.
"eek urk" -> "red of another hue"
Error, newname "red of another hue" matches the
existing "red" instance.
INAME REPLACE /pattern/ -> "replacement"
Every external instance name in the instance domain is
matched against the regular expression pattern and when a
match is found, the name is changed based on the parts of
the name matched by pattern and the replacement recipe.
pattern follows the syntax of a Posix Extended Regular
Expression (see regex(7)) and replacement follows the
syntax of the s command of sed(1), so & and \1 through \9
may be used to select all or substrings of the instance
name that matches pattern.
Note that the match-and-replace is done at most once per
external instance name, so if there are repeated
sequences of the name that match pattern only the first
one will be matched and replacement applied.
pattern is normally enclosed in slashes (/) or double
quotes ("). An escape (\) may be used before any of the
metacharacters described in regex(3) to specify a literal
character, e.g. \( or \[ or \+ ... The enclosing
delimiters cannot be escaped, so to embed a literal
slash, use double quotes as the delimiter, or vice versa.
replacement is normally enclosed by double quotes (") or
slashes (/). An escape (\) may be used before & or \ to
specify these characters literally. The enclosing
delimiters cannot be escaped, so to embed a double quote,
use slashes as the delimiter, or vice versa.
If the instance names after replacement contain any
embedded spaces then special care needs to be taken in
respect of the PCP instance naming rule that treats the
leading non-space part of the instance name as the unique
portion of the name for the purposes of matching and
ensuring uniqueness within an instance domain. Refer to
pmdaInstance(3) for a discussion of this issue.
Here are some examples:
{ iname replace /[a-z]*foo[a-z]*/ -> "FOO" }
replace any word containing "foo" with "FOO"
{ iname replace "([0-9]+) /.*/(.*)" -> "\1 \2" }
removes a directory path, so the instance name
(for one of the proc PMDA's metrics) "2981799
/home/kenj/bin/foobar" would become "2981799
foobar", hiding the user's home directory and
implicitly the user's login name
INAME REDACT
Replace every external instance name in the instance
domain by the string "inst [redacted]" where inst is the
internal instance identifier in ASCII format.
INDOM -> newdomain.newserial
Modifies the metadata for the instance domain and every
metric associated with the instance domain. As a special
case, newserial could be an asterisk ``*'' which means
use serial from the indom rewriting rule, although this
is most useful when serial is also an asterisk. So for
example:
indom 29.* { indom -> 109.* }
will move all instance domains from domain 29 to domain
109.
INDOM -> DUPLICATE newdomain.newserial
A special case of the previous INDOM clause where the
instance domain is a duplicate copy of the domain.serial
instance domain from the indom rewriting rule, and then
any mapping rules are applied to the copied
newdomain.newserial instance domain. This is useful when
a PMDA is split and the same instance domain needs to be
replicated for domain domain and domain newdomain. So
for example if the metrics foo.one and foo.two are both
defined over instance domain 12.34, and foo.two is moved
to another PMDA using domain 27, then the following
rewriting rules could be used:
indom 12.34 { indom -> duplicate 27.34 }
metric foo.two { indom -> 27.34 pmid -> 27.*.* }
INST oldid -> newid
The instance identified by the internal instance
identifier oldid is renumbered to newid. Both oldid and
newid are integers in the range 0 to 231-1.
As a special case, newid may be the keyword DELETE and
then the instance oldid will be expunged from outlog
which removes it from the instance domain metadata and
removes all values of this instance for all the
associated metrics.
A metric rewriting rule has the form:
METRIC metricid { metricspec ... }
where metricid identifies one or more existing metrics from inlog
using either a metric name, or the internal encoding for a
metric's PMID as domain.cluster.item. In the latter case,
typically domain would be an integer in the range 1 to 510,
cluster would be an integer in the range 0 to 4095, and item
would be an integer in the range 0 to 1023.
As special cases item could be an asterisk ``*'' which means the
rule applies to every metric with a domain number of domain and a
cluster number of cluster, or cluster could be an asterisk which
means the rule applies to every metric with a domain number of
domain and an item number of item, or both cluster and item could
be asterisks, and rule applies to every metric with a domain
number of domain.
If a designated metric is not in inlog the rule has no effect.
The metricspec is zero or more of the following clauses:
DELETE
The metric is completely removed from outlog, both the
metadata and all values in results are expunged.
INDOM -> newdomain.newserial [ pick ]
Modifies the metadata to change the instance domain for
this metric. The new instance domain must exist in
outlog.
The optional pick clause may be used to select one input
value, or compute an aggregate value from the instances
in an input result, or assign an internal instance
identifier to a single output value. If no pick clause
is specified, the default behaviour is to copy all input
values from each input result to an output result,
however if the input instance domain is singular (indom
PM_INDOM_NULL) then the one output value must be assigned
an internal instance identifier, which is 0 by default,
unless over-ridden by a INST or INAME clause as defined
below.
The choices for pick are as follows:
OUTPUT FIRST
choose the value of the first instance from each
input result
OUTPUT LAST
choose the value of the last instance from each
input result
OUTPUT INST instid
choose the value of the instance with internal
instance identifier instid from each result; the
sequence of rewriting rules ensures the OUTPUT
processing happens before instance identifier
renumbering from any associated indom rule, so
instid should be one of the internal instance
identifiers that appears in inlog
OUTPUT INAME "name"
choose the value of the instance with name for its
external instance name from each result; the
sequence of rewriting rules ensures the OUTPUT
processing happens before instance renaming from
any associated indom rule, so name should be one
of the external instance names that appears in
inlog
OUTPUT MIN
choose the smallest value in each result (metric
type must be numeric and output instance will be 0
for a non-singular instance domain)
OUTPUT MAX
choose the largest value in each result (metric
type must be numeric and output instance will be 0
for a non-singular instance domain)
OUTPUT SUM
choose the sum of all values in each result
(metric type must be numeric and output instance
will be 0 for a non-singular instance domain)
OUTPUT AVG
choose the average of all values in each result
(metric type must be numeric and output instance
will be 0 for a non-singular instance domain)
If the input instance domain is singular (indom
PM_INDOM_NULL) then independent of any pick
specifications, there is at most one value in each input
result and so FIRST, LAST, MIN, MAX, SUM and AVG are all
equivalent and the output instance identifier will be 0.
In general it is an error to specify a rewriting action
for the same metadata or result values more than once,
e.g. more than one INDOM clause for the same instance
domain. The one exception is the possible interaction
between the INDOM clauses in the indom and metric rules.
For example the metric sample.bin is defined over the
instance domain 29.2 in inlog and the following is
acceptable (albeit redundant):
indom 29.* { indom -> 109.* }
metric sample.bin { indom -> 109.2 }
However the following is an error, because the instance
domain for sample.bin has two conflicting definitions:
indom 29.* { indom -> 109.* }
metric sample.bin { indom -> 123.2 }
INDOM -> NULL[ pick ]
The metric (which must have been previously defined over
an instance domain) is being modified to be a singular
metric. This involves a metadata change and collapsing
all results for this metric so that multiple values
become one value.
The optional pick part of the clause defines how the one
value for each result should be calculated and follows
the same rules as described for the non-NULL INDOM case
above.
In the absence of pick, the default is OUTPUT FIRST.
NAME -> newname
Renames the metric in the PCP archive's metadata that
supports the Performance Metrics Name Space (PMNS).
newname should not match any existing name in the
archive's PMNS and must follow the syntactic rules for
valid metric names as outlined in PMNS(5).
PMID -> newdomain.newcluster.newitem
Modifies the metadata and results to renumber the
metric's PMID. As special cases, newcluster could be an
asterisk ``*'' which means use cluster from the metric
rewriting rule and/or item could be an asterisk which
means use item from the metric rewriting rule. This is
most useful when cluster and/or item is also an asterisk.
So for example:
metric 30.*.* { pmid -> 123.*.* }
will move all metrics from domain 30 to domain 123.
SEM -> newsem
Change the semantics of the metric. newsem should be the
XXX part of the name of one of the PM_SEM_XXX macros
defined in <pcp/pmapi.h> or pmLookupDesc(3), e.g.
COUNTER for PM_TYPE_COUNTER.
No data value rewriting is performed as a result of the
SEM clause, so the usefulness is limited to cases where a
version of the associated PMDA was exporting incorrect
semantics for the metric. pmlogreduce(1) may provide an
alternative in cases where re-computation of result
values is desired.
TYPE -> newtype
Change the type of the metric which alters the metadata
and may change the encoding of values in results.
newtype should be the XXX part of the name of one of the
PM_TYPE_XXX macros defined in <pcp/pmapi.h> or
pmLookupDesc(3), e.g. FLOAT for PM_TYPE_FLOAT.
Type conversion is only supported for cases where the old
and new metric type is numeric, so PM_TYPE_STRING,
PM_TYPE_AGGREGATE and PM_TYPE_EVENT are not allowed.
Even for the numeric cases, some conversions may produce
run-time errors, e.g. integer overflow, or attempting to
rewrite a negative value into an unsigned type.
TYPE IF oldtype -> newtype
The same as the preceding TYPE clause, except the type of
the metric is only changed to newtype if the type of the
metric in inlog is oldtype.
This useful in cases where the type of metricid in inlog
may be platform dependent and so more than one type
rewriting rule is required.
UNITS -> newunits [ RESCALE ]
newunits is six values separated by commas. The first 3
values describe the dimension of the metric along the
dimensions of space, time and count; these are integer
values, usually 0, 1 or -1. The remaining 3 values
describe the scale of the metric's values in the
dimensions of space, time and count. Space scale values
should be 0 (if the space dimension is 0), else the XXX
part of the name of one of the PM_SPACE_XXX macros, e.g.
KBYTE for PM_TYPE_KBYTE. Time scale values should be 0
(if the time dimension is 0), else the XXX part of the
name of one of the PM_TIME_XXX macros, e.g. SEC for
PM_TIME_SEC. Count scale values should be 0 (if the time
dimension is 0), else ONE for PM_COUNT_ONE.
The PM_SPACE_XXX, PM_TIME_XXX and PM_COUNT_XXX macros are
defined in <pcp/pmapi.h> or pmLookupDesc(3).
When the scale is changed (but the dimension is
unaltered) the optional keyword RESCALE may be used to
chose value rescaling as per the -s command line option,
but applied to just this metric.
VALUE REPLACE /pattern/ -> "replacement"
The value for every instance of the metric is matched
against the regular expression pattern and when a match
is found, the value is changed based on the parts of the
value matched by pattern and the replacement recipe.
pattern follows the syntax of a Posix Extended Regular
Expression (see regex(7)) and replacement follows the
syntax of the s command of sed(1), so & and \1 through \9
may be used to select all or substrings of the value that
matches pattern.
Note that the match-and-replace is done at most once per
metric value, so if there are repeated sequences of the
metric value that match pattern only the first one will
be matched and replacement applied.
pattern is normally enclosed in slashes (/) or double
quotes ("). An escape (\) may be used before any of the
metacharacters described in regex(3) to specify a literal
character, e.g. \( or \[ or \+ ... The enclosing
delimiters cannot be escaped, so to embed a literal
slash, use double quotes as the delimiter, or vice versa.
replacement is normally enclosed by double quotes (") or
slashes (/). An escape (\) may be used before & or \ to
specify these characters literally. The enclosing
delimiters cannot be escaped, so to embed a double quote,
use slashes as the delimiter, or vice versa.
The REPLACE keyword is optional.
This clause can only be applied to metrics with values of
type PM_TYPE_STRING.
Here are some examples:
{ value /.*/ -> "" }
remove the value everywhere
value "/.*/(.*)" -> "\1" }
removes a directory path, so the metric value
"mumble /home/kenj/bin/foobar fumble" would become
"mumble foobar fumble", hiding the user's home
directory and implicitly the user's login name
When changing the domain number for a metric or instance
domain, the new domain number will usually match an existing
PMDA's domain number. If this is not the case, then the new
domain number should not be randomly chosen; consult
$PCP_VAR_DIR/pmns/stdpmid for domain numbers that are already
assigned to PMDAs.
A text rewriting rule modifies a help text record and has the
form:
TEXT textid [ texttype ] [ "textcontent" ] { textspec ... }
where textid identifies the metric or instance domain with which
the text is currently associated, and is either METRIC metricid
or INDOM domain.serial.
metricid has the same form and meaning as for a METRIC rewriting
rule (see above) and domain.serial has the same form and meaning
as for an INDOM rewriting rule (see above).
The optional texttype identifies the type of text and may be one
of ONELINE to select the one line help text, HELP to select the
full help text, or ALL or an asterisk ``*'' to select both types
of help text. If texttype is not specified, then the default is
ONELINE.
The optional textcontent further restricts the selected text
records to those containing the specified content. Characters
such as double quotes may be escaped by preceding them with a
backslash ``\''.
If a designated help text record is not in inlog the rule has no
effect.
The textspec is zero or more of the following clauses:
DELETE
The selected text is completely removed from outlog.
INDOM -> newdomain.newserial
Re-associates the text with the specified instance
domain. As a special case, newserial could be an
asterisk ``*'' which means use serial from the text
rewriting rule, although this is most useful when serial
is also an asterisk. So for example:
text indom 29.* all { indom -> 109.* }
will re-associate all text associated with instance
domains from domain 29 to domain 109.
METRIC -> newdomain.newcluster.newitem
Re-associates the text with the specified metric. As
special cases, newcluster could be an asterisk ``*''
which means use cluster from the text rewriting rule
and/or item could be an asterisk which means use item
from the text rewriting rule. This is most useful when
cluster and/or item is also an asterisk. So for example:
text metric 30.*.* all { metric -> 123.*.* }
will re-associate all text associated with metrics from
domain 30 to domain 123.
TEXT -> "new-text"
Replaces the content of the selected text with new-text.
A label rewriting rule modifies a label record and has the form:
LABEL labelid [ instance ] [ "label-name[1m"[24m [22m] [ "label-value[1m"[24m [22m] {
labelspec ... }
where labelid refers to the global context or identifies the
metric domain, metric cluster, metric item, instance domain, or
instance domain instances with which the label is currently
associated, and is either CONTEXT or DOMAIN domainid or CLUSTER
domainid.clusterid or ITEM metricid or INDOM domain.serial or
INSTANCES domain.serial.
metricid has the same form and meaning as for a METRIC rewriting
rule (see above). clusterid may be an asterisk ``*'' which means
the rule applies to every metric with a domain number of domainid
in the same way as an asterisk may be used for the cluster within
metricid.
domain.serial has the same form and meaning as for an INDOM
rewriting rule (see above).
In the case of an INSTANCES labelid, the name or number of a
specific instance may be optionally specified as instance. This
name or number number may be omitted or specified as an asterisk
``*'' to indicate that labels for all instances of the specified
instance domain are selected. If an instance name is specified,
it must be within double quotes. If the instance name contains
any embedded spaces then special care needs to be taken in
respect of the PCP instance naming rule that treats the leading
non-space part of the instance name as the unique portion of the
name for the purposes of matching and ensuring uniqueness within
an instance domain, refer to pmdaInstance(3) for a discussion of
this issue.
In all cases, a "label-name[1m"[24m [22mand/or a "label-value[1m"[24m [22mmay be
optionally specified in double quotes in order to select labels
with the given name and/or given value. These may individually
be omitted or specified as asterisks ``*'' to indicate that
labels with all names and/or values are selected.
If a designated label record is not in inlog the rule has no
effect.
The labelspec is zero or more of the following clauses:
DELETE
The selected labels are completely removed from outlog.
NEW "new-label-name" "new-label-value"
A new label with the name "new-label-name[1m"[24m [22mand the value
"new-label-value[1m"[24m [22mis created and associated with the
specified labelid and optional instance (in the case of a
INSTANCES labelid). If "label-name[1m"[24m [22mor "label-value"
were specified, then they are ignored with a warning. If
instance is not specified for an INSTANCES labelid, then
a new label will be created for each instance in the
specified instance domain.
LABEL -> "new-label-name"
The name of the selected label(s) is changed to "new-
label-name[1m"[24m[22m.
VALUE -> "new-label-value"
The value of the selected label(s) is changed to "new-
label-value[1m"[24m[22m.
DOMAIN -> newdomain
Re-associates the selected label(s) with the specified
metric domain. For example:
label domain 30 { domain -> 123 }
will re-associate all labels associated with domains from
domain 30 to domain 123.
CLUSTER -> newdomain.newcluster
Re-associates the selected label(s) with the specified
metric cluster. As a special case, newcluster could be
an asterisk ``*'' which means use cluster from the label
rewriting rule. This is most useful when cluster is also
an asterisk. So for example:
label cluster 30.* { cluster -> 123.* }
will re-associate all labels associated with clusters
from domain 30 to domain 123.
ITEM -> newdomain.newcluster.newitem
Re-associates the selected label(s) with the specified
metric item. As special cases, newcluster could be an
asterisk ``*'' which means use cluster from the label
rewriting rule and/or item could be an asterisk which
means use item from the label rewriting rule. This is
most useful when cluster and/or item is also an asterisk.
So for example:
label item 30.*.* { item -> 123.*.* }
will re-associate all labels associated with metrics from
domain 30 to domain 123.
INDOM -> newdomain.newserial
Re-associates the selected label(s) with the specified
instance domain. As a special case, newserial could be
an asterisk ``*'' which means use serial from the label
rewriting rule, although this is most useful when serial
is also an asterisk. So for example:
label indom 29.* { indom -> 109.* }
will re-associate all labels associated with instance
domains from domain 29 to domain 109.
INSTANCES -> newdomain.newserial
This is the same as INDOM except that it re-associates
the selected label(s) with the instances of the specified
instance domain.
To promote the values of the per-disk IOPS metrics to 64-bit to
allow aggregation over a long time period for capacity planning,
or because the PMDA has changed to export 64-bit counters and we
want to convert old archives so they can be processed alongside
new archives.
metric disk.dev.read { type -> U64 }
metric disk.dev.write { type -> U64 }
metric disk.dev.total { type -> U64 }
The instances associated with the load average metric
kernel.all.load could be renamed and renumbered by the rules
below.
# for the Linux PMDA, the kernel.all.load metric is defined
# over instance domain 60.2
indom 60.2 {
inst 1 -> 60 iname "1 minute" -> "60 second"
inst 5 -> 300 iname "5 minute" -> "300 second"
inst 15 -> 900 iname "15 minute" -> "900 second"
}
If we decide to split the ``proc'' metrics out of the Linux PMDA,
this will involve changing the domain number for the PMID of
these metrics and the associated instance domains. The rules
below would rewrite an old archive to match the changes after the
PMDA split.
# all Linux proc metrics are in 7 clusters
metric 60.8.* { pmid -> 123.*.* }
metric 60.9.* { pmid -> 123.*.* }
metric 60.13.* { pmid -> 123.*.* }
metric 60.24.* { pmid -> 123.*.* }
metric 60.31.* { pmid -> 123.*.* }
metric 60.32.* { pmid -> 123.*.* }
metric 60.51.* { pmid -> 123.*.* }
# only one instance domain for Linux proc metrics
indom 60.9 { indom -> 123.0 }
If the metric foo.count_em was exported as a native ``long'' then
it could be a 32-bit integer on some platforms and a 64-bit
integer on other platforms. Subsequent investigations show the
value is in fact unsigned, so the following rules could be used.
metric foo.count_em {
type if 32 -> U32
type if 64 -> U64
}
All error conditions detected by pmlogrewrite are reported on
stderr with textual (if sometimes terse) explanation.
Should the input archive be corrupted (this can happen if the
pmlogger instance writing the archive suddenly dies), then
pmlogrewrite will detect and report the position of the
corruption in the file, and any subsequent information from that
archive will not be processed.
If the input archive contains no archive records then an ``empty
archive'' warning is issued and no processing is performed.
If any error is detected, pmlogrewrite will exit with a non-zero
status.
For each of the inlog and outlog archives, several physical files
are used.
archive.meta
metadata (metric descriptions, instance domains, etc.) for
the archive
archive.0
initial volume of metrics values (subsequent volumes have
suffixes 1, 2, ...).
archive.index
temporal index to support rapid random access to the other
files in the archive.
Environment variables with the prefix PCP_ are used to
parameterize the file and directory names used by PCP. On each
installation, the file /etc/pcp.conf contains the local values
for these variables. The $PCP_CONF variable may be used to
specify an alternative configuration file, as described in
pcp.conf(5).
For environment variables affecting PCP tools, see
pmGetOptions(3).
PCPIntro(1), pmlogdump(1), pmlogextract(1), pmlogger(1),
pmloglabel(1), pmlogredact(1), pmlogreduce(1), PMAPI(3),
pmdaInstance(3), pmLookupDesc(3), tzset(3), LOGARCHIVE(5),
pcp.conf(5), pcp.env(5), PMNS(5) and regex(7).
This page is part of the PCP (Performance Co-Pilot) project.
Information about the project can be found at
⟨http://www.pcp.io/⟩. If you have a bug report for this manual
page, send it to pcp@groups.io. This page was obtained from the
project's upstream Git repository
⟨https://github.com/performancecopilot/pcp.git⟩ on 2024-06-14.
(At that time, the date of the most recent commit that was found
in the repository was 2024-06-14.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Performance Co-Pilot PMLOGREWRITE(1)
Pages that refer to this page: pmdaperfevent(1), pmlogcheck(1), pmlogextract(1), pmlogger_daily(1), pmlogger_rewrite(1), pmloglabel(1), pmlogredact(1), pmdainit(3), pmnewcontext(3), LOGARCHIVE(5)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|