|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | VERSIONS | STANDARDS | HISTORY | SEE ALSO | COLOPHON |
|
|
|
io_submit(2) System Calls Manual io_submit(2)
io_submit - submit asynchronous I/O blocks for processing
Standard C library (libc, -lc)
Alternatively, Asynchronous I/O library (libaio, -laio); see
VERSIONS.
#include <linux/aio_abi.h> /* Defines needed types */
int io_submit(aio_context_t ctx_id, long nr, struct iocb **iocbpp);
Note: There is no glibc wrapper for this system call; see
VERSIONS.
Note: this page describes the raw Linux system call interface.
The wrapper function provided by libaio uses a different type for
the ctx_id argument. See VERSIONS.
The io_submit() system call queues nr I/O request blocks for
processing in the AIO context ctx_id. The iocbpp argument should
be an array of nr AIO control blocks, which will be submitted to
context ctx_id.
The iocb (I/O control block) structure defined in linux/aio_abi.h
defines the parameters that control the I/O operation.
#include <linux/aio_abi.h>
struct iocb {
__u64 aio_data;
__u32 PADDED(aio_key, aio_rw_flags);
__u16 aio_lio_opcode;
__s16 aio_reqprio;
__u32 aio_fildes;
__u64 aio_buf;
__u64 aio_nbytes;
__s64 aio_offset;
__u64 aio_reserved2;
__u32 aio_flags;
__u32 aio_resfd;
};
The fields of this structure are as follows:
aio_data
This data is copied into the data field of the io_event
structure upon I/O completion (see io_getevents(2)).
aio_key
This is an internal field used by the kernel. Do not
modify this field after an io_submit() call.
aio_rw_flags
This defines the R/W flags passed with structure. The
valid values are:
RWF_APPEND (since Linux 4.16)
Append data to the end of the file. See the
description of the flag of the same name in
pwritev2(2) as well as the description of O_APPEND
in open(2). The aio_offset field is ignored. The
file offset is not changed.
RWF_DSYNC (since Linux 4.13)
Write operation complete according to requirement
of synchronized I/O data integrity. See the
description of the flag of the same name in
pwritev2(2) as well the description of O_DSYNC in
open(2).
RWF_HIPRI (since Linux 4.13)
High priority request, poll if possible
RWF_NOWAIT (since Linux 4.14)
Don't wait if the I/O will block for operations
such as file block allocations, dirty page flush,
mutex locks, or a congested block device inside the
kernel. If any of these conditions are met, the
control block is returned immediately with a return
value of -EAGAIN in the res field of the io_event
structure (see io_getevents(2)).
RWF_SYNC (since Linux 4.13)
Write operation complete according to requirement
of synchronized I/O file integrity. See the
description of the flag of the same name in
pwritev2(2) as well the description of O_SYNC in
open(2).
aio_lio_opcode
This defines the type of I/O to be performed by the iocb
structure. The valid values are defined by the enum
defined in linux/aio_abi.h:
enum {
IOCB_CMD_PREAD = 0,
IOCB_CMD_PWRITE = 1,
IOCB_CMD_FSYNC = 2,
IOCB_CMD_FDSYNC = 3,
IOCB_CMD_POLL = 5,
IOCB_CMD_NOOP = 6,
IOCB_CMD_PREADV = 7,
IOCB_CMD_PWRITEV = 8,
};
aio_reqprio
This defines the requests priority.
aio_fildes
The file descriptor on which the I/O operation is to be
performed.
aio_buf
This is the buffer used to transfer data for a read or
write operation.
aio_nbytes
This is the size of the buffer pointed to by aio_buf.
aio_offset
This is the file offset at which the I/O operation is to
be performed.
aio_flags
This is the set of flags associated with the iocb
structure. The valid values are:
IOCB_FLAG_RESFD
Asynchronous I/O control must signal the file
descriptor mentioned in aio_resfd upon completion.
IOCB_FLAG_IOPRIO (since Linux 4.18)
Interpret the aio_reqprio field as an IOPRIO_VALUE
as defined by linux/ioprio.h.
aio_resfd
The file descriptor to signal in the event of asynchronous
I/O completion.
On success, io_submit() returns the number of iocbs submitted
(which may be less than nr, or 0 if nr is zero). For the failure
return, see VERSIONS.
EAGAIN Insufficient resources are available to queue any iocbs.
EBADF The file descriptor specified in the first iocb is
invalid.
EFAULT One of the data structures points to invalid data.
EINVAL The AIO context specified by ctx_id is invalid. nr is
less than 0. The iocb at *iocbpp[0] is not properly
initialized, the operation specified is invalid for the
file descriptor in the iocb, or the value in the
aio_reqprio field is invalid.
ENOSYS io_submit() is not implemented on this architecture.
EPERM The aio_reqprio field is set with the class
IOPRIO_CLASS_RT, but the submitting context does not have
the CAP_SYS_ADMIN capability.
glibc does not provide a wrapper for this system call. You could
invoke it using syscall(2). But instead, you probably want to
use the io_submit() wrapper function provided by libaio.
Note that the libaio wrapper function uses a different type
(io_context_t) for the ctx_id argument. Note also that the
libaio wrapper does not follow the usual C library conventions
for indicating errors: on error it returns a negated error number
(the negative of one of the values listed in ERRORS). If the
system call is invoked via syscall(2), then the return value
follows the usual conventions for indicating an error: -1, with
errno set to a (positive) value that indicates the error.
Linux.
Linux 2.5.
io_cancel(2), io_destroy(2), io_getevents(2), io_setup(2), aio(7)
This page is part of the man-pages (Linux kernel and C library
user-space interface documentation) project. Information about
the project can be found at
⟨https://www.kernel.org/doc/man-pages/⟩. If you have a bug report
for this manual page, see
⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩.
This page was obtained from the tarball man-pages-6.9.1.tar.gz
fetched from
⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on
2024-06-26. If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or more up-
to-date source for the page, or you have corrections or
improvements to the information in this COLOPHON (which is not
part of the original manual page), send a mail to
man-pages@man7.org
Linux man-pages 6.9.1 2024-05-02 io_submit(2)
Pages that refer to this page: fcntl(2), io_cancel(2), io_destroy(2), io_getevents(2), io_setup(2), syscalls(2), systemd.exec(5), aio(7)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|