|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | AUTHOR | COLOPHON |
|
|
|
DEVLINK-DEV(8) Linux DEVLINK-DEV(8)
devlink-dev - devlink device configuration
devlink [ OPTIONS ] dev { COMMAND | help }
OPTIONS := { -V[ersion] | -n[no-nice-names] }
devlink dev show [ DEV ]
devlink dev help
devlink dev eswitch set DEV [ mode { legacy | switchdev } ] [
inline-mode { none | link | network | transport } ] [
encap-mode { none | basic } ]
devlink dev eswitch show DEV
devlink dev param set DEV name PARAMETER value VALUE cmode {
runtime | driverinit | permanent }
devlink dev param show [ DEV name PARAMETER ]
devlink dev reload DEV [ netns { PID | NAME | ID } ] [ action {
driver_reinit | fw_activate } ] [ limit no_reset ]
devlink dev info [ DEV ]
devlink dev flash DEV file PATH [ target ID ]
devlink dev selftests show [ DEV ]
devlink dev selftests run DEV [ id ID... ]
devlink dev show - display devlink device attributes
DEV - specifies the devlink device to show. If this argument is
omitted all devices are listed.
Format is:
BUS_NAME/BUS_ADDRESS
devlink dev eswitch show - display devlink device eswitch attributes
devlink dev eswitch set - sets devlink device eswitch attributes
mode { legacy | switchdev }
Set eswitch mode
legacy - Legacy SRIOV
switchdev - SRIOV switchdev offloads
inline-mode { none | link | network | transport }
Some HWs need the VF driver to put part of the packet
headers on the TX descriptor so the e-switch can do proper
matching and steering.
none - None
link - L2 mode
network - L3 mode
transport - L4 mode
encap-mode { none | basic }
Set eswitch encapsulation support
none - Disable encapsulation support
basic - Enable encapsulation support
devlink dev param set - set new value to devlink device configuration
parameter
name PARAMETER
Specify parameter name to set.
value VALUE
New value to set.
cmode { runtime | driverinit | permanent }
Configuration mode in which the new value is set.
runtime - Set new value while driver is running. This
configuration mode doesn't require any reset to apply the
new value.
driverinit - Set new value which will be applied during
driver initialization. This configuration mode requires
restart driver by devlink reload command to apply the new
value.
permanent - New value is written to device's non-volatile
memory. This configuration mode requires hard reset to
apply the new value.
devlink dev param show - display devlink device supported
configuration parameters attributes
name PARAMETER Specify parameter name to show. If this argument
is omitted all parameters supported by devlink devices are
listed.
devlink dev reload - perform hot reload of the driver.
DEV - Specifies the devlink device to reload.
netns { PID | NAME | ID } - Specifies the network namespace to
reload into, either by pid, name or id.
action { driver_reinit | fw_activate } - Specifies the reload
action required. If this argument is omitted driver_reinit
action will be used. Note that even though user asks for a
specific action, the driver implementation might require to
perform another action alongside with it. For example, some
driver do not support driver reinitialization being performed
without fw activation. Therefore, the devlink reload command
returns the list of actions which were actrually performed.
driver_reinit - Driver entities re-initialization, applying
devlink-param and devlink-resource values.
fw_activate - Activates new firmware if such image is stored and
pending activation. If no limitation specified this action may
involve firmware reset. If no new image pending this action will
reload current firmware image.
limit no_reset - Specifies limitation on reload action. If this
argument is omitted limit is unspecified and the reload action is
not limited. In such case driver implementation may include reset
or downtime as needed to perform the actions.
no_reset - No reset allowed, no down time allowed, no link flap
and no configuration is lost.
devlink dev info - display device information.
Display device information provided by the driver. This command
can be used to query versions of the hardware components or
device components which can't be updated ( fixed ) as well as
device firmware which can be updated. For firmware components
running displays the versions of firmware currently loaded into
the device, while stored reports the versions in device's flash.
Running and stored versions may differ after flash has been
updated, but before reboot.
DEV - specifies the devlink device to show. If this argument is
omitted all devices are listed.
devlink dev flash - write device's non-volatile memory.
DEV - specifies the devlink device to write to.
file PATH - Path to the file which will be written into device's
flash. The path needs to be relative to one of the directories
searched by the kernel firmware loader, such as /lib/firmware.
component NAME - If device stores multiple firmware images in
non-volatile memory, this parameter may be used to indicate which
firmware image should be written. The value of NAME should match
the component names from devlink dev info and may be driver-
dependent.
devlink dev selftests show - shows supported selftests on devlink
device.
DEV - specifies the devlink device. If this argument is omitted
all selftests for devlink devices are listed.
devlink dev selftests run - runs selftests on devlink device.
DEV - specifies the devlink device to execute selftests.
id ID... - The value of ID(s) should match the selftests shown
in devlink dev selftests show to execute selftests on the devlink
device. If this argument is omitted all selftests supported by
devlink devices are executed.
devlink dev show
Shows the state of all devlink devices on the system.
devlink dev show pci/0000:01:00.0
Shows the state of specified devlink device.
devlink dev eswitch show pci/0000:01:00.0
Shows the eswitch mode of specified devlink device.
devlink dev eswitch set pci/0000:01:00.0 mode switchdev
Sets the eswitch mode of specified devlink device to
switchdev.
devlink dev param show pci/0000:01:00.0 name max_macs
Shows the parameter max_macs attributes.
devlink dev param set pci/0000:01:00.0 name internal_error_reset
value true cmode runtime
Sets the parameter internal_error_reset of specified devlink
device to true.
devlink dev reload pci/0000:01:00.0
Performs hot reload of specified devlink device.
devlink dev flash pci/0000:01:00.0 file firmware.bin
Flashes the specified devlink device with provided firmware
file name. If the driver supports it, user gets updates about
the flash status. For example:
Preparing to flash
Flashing 100%
Flashing done
devlink dev selftests show pci/0000:01:00.0
Shows the supported selftests by the devlink device.
devlink dev selftests run pci/0000:01:00.0 id flash
Perform a flash test on the devlink device.
devlink(8), devlink-port(8), devlink-sb(8), devlink-monitor(8),
Jiri Pirko <jiri@mellanox.com>
This page is part of the iproute2 (utilities for controlling
TCP/IP networking and traffic) project. Information about the
project can be found at
⟨http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2⟩.
If you have a bug report for this manual page, send it to
netdev@vger.kernel.org, shemminger@osdl.org. This page was
obtained from the project's upstream Git repository
⟨https://git.kernel.org/pub/scm/network/iproute2/iproute2.git⟩ on
2024-06-14. (At that time, the date of the most recent commit
that was found in the repository was 2024-06-11.) If you
discover any rendering problems in this HTML version of the page,
or you believe there is a better or more up-to-date source for
the page, or you have corrections or improvements to the
information in this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org
iproute2 14 Mar 2016 DEVLINK-DEV(8)
Pages that refer to this page: devlink(8), devlink-dpipe(8), devlink-health(8), devlink-lc(8), devlink-monitor(8), devlink-port(8), devlink-region(8), devlink-sb(8), devlink-trap(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|