|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION FILE | NOTES | SEE ALSO | AUTHOR | COLOPHON |
|
|
|
rpc.nfsd(8) System Manager's Manual rpc.nfsd(8)
rpc.nfsd - NFS server process
/usr/sbin/rpc.nfsd [options] nproc
The rpc.nfsd program implements the user level part of the NFS
service. The main functionality is handled by the nfsd kernel
module. The user space program merely specifies what sort of
sockets the kernel service should listen on, what NFS versions it
should support, and how many kernel threads it should use.
The rpc.mountd server provides an ancillary service needed to
satisfy mount requests by NFS clients.
-d or --debug
enable logging of debugging messages
-H or --host hostname
specify a particular hostname (or address) that NFS
requests will be accepted on. By default, rpc.nfsd will
accept NFS requests on all known network addresses. Note
that lockd (which performs file locking services for NFS)
may still accept request on all known network addresses.
This may change in future releases of the Linux Kernel.
This option can be used multiple times to listen to more
than one interface.
-S or --scope scope
NFSv4.1 and later require the server to report a "scope"
which is used by the clients to detect if two connections
are to the same server. By default Linux NFSD uses the
host name as the scope.
It is particularly important for high-availablity
configurations to ensure that all potential server nodes
report the same server scope.
-p or --port port
specify a different port to listen on for NFS requests. By
default, rpc.nfsd will listen on port 2049.
-r or --rdma
specify that NFS requests on the standard RDMA port
("nfsrdma", port 20049) should be honored.
--rdma=port
Listen for RDMA requests on an alternate port - may be a
number or a name listed in /etc/services.
-N or --no-nfs-version vers
This option can be used to request that rpc.nfsd does not
offer certain versions of NFS. The current version of
rpc.nfsd can support major NFS versions 3,4 and the minor
versions 4.0, 4.1 and 4.2.
-s or --syslog
By default, rpc.nfsd logs error messages (and debug
messages, if enabled) to stderr. This option makes
rpc.nfsd log these messages to syslog instead. Note that
errors encountered during option processing will still be
logged to stderr regardless of this option.
-t or --tcp
Instruct the kernel nfs server to open and listen on a TCP
socket. This is the default.
-T or --no-tcp
Instruct the kernel nfs server not to open and listen on a
TCP socket.
-u or --udp
Instruct the kernel nfs server to open and listen on a UDP
socket.
-U or --no-udp
Instruct the kernel nfs server not to open and listen on a
UDP socket. This is the default.
-V or --nfs-version vers
This option can be used to request that rpc.nfsd offer
certain versions of NFS. The current version of rpc.nfsd
can support major NFS versions 3,4 and the minor versions
4.0, 4.1 and 4.2.
-L or --lease-time seconds
Set the lease-time used for NFSv4. This corresponds to
how often clients need to confirm their state with the
server. Valid range is from 10 to 3600 seconds.
-G or --grace-time seconds
Set the grace-time used for NFSv4 and NLM (for NFSv2 and
NFSv3). New file open requests (NFSv4) and new file locks
(NLM) will not be allowed until after this time has passed
to allow clients to recover state.
nproc specify the number of NFS server threads. By default,
eight threads are started. However, for optimum
performance several threads should be used. The actual
figure depends on the number of and the work load created
by the NFS clients, but a useful starting point is eight
threads. Effects of modifying that number can be checked
using the nfsstat(8) program.
Note that if the NFS server is already running, then the options
for specifying host, port, and protocol will be ignored. The
number of processes given will be the only option considered, and
the number of active nfsd processes will be increased or
decreased to match this number. In particular rpc.nfsd 0 will
stop all threads and thus close any open connections.
Many of the options that can be set on the command line can also
be controlled through values set in the [nfsd] section of the
/etc/nfs.conf configuration file. Values recognized include:
threads
The number of threads to start.
host A host name, or comma separated list of host names, that
rpc.nfsd will listen on. Use of the --host option
replaces all host names listed here.
scope Set the server scope.
grace-time
The grace time, for both NFSv4 and NLM, in seconds.
lease-time
The lease time for NFSv4, in seconds.
port Set the port for TCP/UDP to bind to.
rdma Enable RDMA port (with "on" or "yes" etc) on the standard
port ("nfsrdma", port 20049).
rdma-port
Set an alternate RDMA port.
UDP Enable (with "on" or "yes" etc) or disable ("off", "no")
UDP support.
TCP Enable or disable TCP support.
vers3
vers4 Enable or disable all NFSv4 versions. All versions are
normally enabled by default.
vers4.1
vers4.2
Setting these to "off" or similar will disable the
selected minor versions. Setting to "on" will enable
them. The default values are determined by the kernel,
and usually minor versions default to being enabled once
the implementation is sufficiently complete.
If the program is built with TI-RPC support, it will enable any
protocol and address family combinations that are marked visible
in the netconfig database.
nfsd(7), rpc.mountd(8), exports(5), exportfs(8), nfs.conf(5),
rpc.rquotad(8), nfsstat(8), netconfig(5).
Olaf Kirch, Bill Hawes, H. J. Lu, G. Allan Morris III, and a host
of others.
This page is part of the nfs-utils (NFS utilities) project.
Information about the project can be found at
⟨http://linux-nfs.org/wiki/index.php/Main_Page⟩. If you have a
bug report for this manual page, see
⟨http://linux-nfs.org/wiki/index.php/Main_Page⟩. This page was
obtained from the project's upstream Git repository
⟨git://git.linux-nfs.org/projects/steved/nfs-utils.git⟩ on
2024-06-14. (At that time, the date of the most recent commit
that was found in the repository was 2024-05-10.) If you
discover any rendering problems in this HTML version of the page,
or you believe there is a better or more up-to-date source for
the page, or you have corrections or improvements to the
information in this COLOPHON (which is not part of the original
manual page), send a mail to man-pages@man7.org
20 Feb 2014 rpc.nfsd(8)
Pages that refer to this page: exports(5), nfs(5), nfs.conf(5), nfsd(7), mount(8), mountd(8), nfsconf(8), nfsdclnts(8), nfsstat(8), rpcdebug(8), showmount(8), statd(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|