|
HTML rendering created 2025-02-02 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | COMMIT INFORMATION | DATE FORMATS | DISCUSSION | ENVIRONMENT AND CONFIGURATION VARIABLES | HOOKS | FILES | SEE ALSO | GIT | COLOPHON |
|
|
|
GIT-COMMIT(1) Git Manual GIT-COMMIT(1)
git-commit - Record changes to the repository
git commit [-a | --interactive | --patch] [-s] [-v] [-u[<mode>]] [--amend]
[--dry-run] [(-c | -C | --squash) <commit> | --fixup [(amend|reword):]<commit>]
[-F <file> | -m <msg>] [--reset-author] [--allow-empty]
[--allow-empty-message] [--no-verify] [-e] [--author=<author>]
[--date=<date>] [--cleanup=<mode>] [--[no-]status]
[-i | -o] [--pathspec-from-file=<file> [--pathspec-file-nul]]
[(--trailer <token>[(=|:)<value>])...] [-S[<keyid>]]
[--] [<pathspec>...]
Create a new commit containing the current contents of the index
and the given log message describing the changes. The new commit
is a direct child of HEAD, usually the tip of the current branch,
and the branch is updated to point to it (unless no branch is
associated with the working tree, in which case HEAD is "detached"
as described in git-checkout(1)).
The content to be committed can be specified in several ways:
1. by using git-add(1) to incrementally "add" changes to the
index before using the commit command (Note: even modified
files must be "added");
2. by using git-rm(1) to remove files from the working tree and
the index, again before using the commit command;
3. by listing files as arguments to the commit command (without
--interactive or --patch switch), in which case the commit
will ignore changes staged in the index, and instead record
the current content of the listed files (which must already be
known to Git);
4. by using the -a switch with the commit command to
automatically "add" changes from all known files (i.e. all
files that are already listed in the index) and to
automatically "rm" files in the index that have been removed
from the working tree, and then perform the actual commit;
5. by using the --interactive or --patch switches with the commit
command to decide one by one which files or hunks should be
part of the commit in addition to contents in the index,
before finalizing the operation. See the “Interactive Mode”
section of git-add(1) to learn how to operate these modes.
The --dry-run option can be used to obtain a summary of what is
included by any of the above for the next commit by giving the
same set of parameters (options and paths).
If you make a commit and then find a mistake immediately after
that, you can recover from it with git reset.
-a, --all
Automatically stage files that have been modified and deleted,
but new files you have not told Git about are not affected.
-p, --patch
Use the interactive patch selection interface to choose which
changes to commit. See git-add(1) for details.
-C <commit>, --reuse-message=<commit>
Take an existing <commit> object, and reuse the log message
and the authorship information (including the timestamp) when
creating the commit.
-c <commit>, --reedit-message=<commit>
Like -C, but with -c the editor is invoked, so that the user
can further edit the commit message.
--fixup=[(amend|reword):]<commit>
Create a new commit which "fixes up" <commit> when applied
with git rebase --autosquash. Plain --fixup=<commit> creates a
"fixup!" commit which changes the content of <commit> but
leaves its log message untouched. --fixup=amend:<commit> is
similar but creates an "amend!" commit which also replaces the
log message of <commit> with the log message of the "amend!"
commit. --fixup=reword:<commit> creates an "amend!" commit
which replaces the log message of <commit> with its own log
message but makes no changes to the content of <commit>.
The commit created by plain --fixup=<commit> has a subject
composed of "fixup!" followed by the subject line from
<commit>, and is recognized specially by git rebase
--autosquash. The -m option may be used to supplement the log
message of the created commit, but the additional commentary
will be thrown away once the "fixup!" commit is squashed into
<commit> by git rebase --autosquash.
The commit created by --fixup=amend:<commit> is similar but
its subject is instead prefixed with "amend!". The log message
of <commit> is copied into the log message of the "amend!"
commit and opened in an editor so it can be refined. When git
rebase --autosquash squashes the "amend!" commit into
<commit>, the log message of <commit> is replaced by the
refined log message from the "amend!" commit. It is an error
for the "amend!" commit’s log message to be empty unless
--allow-empty-message is specified.
--fixup=reword:<commit> is shorthand for
--fixup=amend:<commit> --only. It creates an "amend!" commit
with only a log message (ignoring any changes staged in the
index). When squashed by git rebase --autosquash, it replaces
the log message of <commit> without making any other changes.
Neither "fixup!" nor "amend!" commits change authorship of
<commit> when applied by git rebase --autosquash. See
git-rebase(1) for details.
--squash=<commit>
Construct a commit message for use with git rebase
--autosquash. The commit message subject line is taken from
the specified commit with a prefix of "squash! ". Can be used
with additional commit message options (-m/-c/-C/-F). See
git-rebase(1) for details.
--reset-author
When used with -C/-c/--amend options, or when committing after
a conflicting cherry-pick, declare that the authorship of the
resulting commit now belongs to the committer. This also
renews the author timestamp.
--short
When doing a dry-run, give the output in the short-format. See
git-status(1) for details. Implies --dry-run.
--branch
Show the branch and tracking info even in short-format.
--porcelain
When doing a dry-run, give the output in a porcelain-ready
format. See git-status(1) for details. Implies --dry-run.
--long
When doing a dry-run, give the output in the long-format.
Implies --dry-run.
-z, --null
When showing short or porcelain status output, print the
filename verbatim and terminate the entries with NUL, instead
of LF. If no format is given, implies the --porcelain output
format. Without the -z option, filenames with "unusual"
characters are quoted as explained for the configuration
variable core.quotePath (see git-config(1)).
-F <file>, --file=<file>
Take the commit message from <file>. Use - to read the message
from the standard input.
--author=<author>
Override the commit author. Specify an explicit author using
the standard A U Thor <author@example.com> format. Otherwise
<author> is assumed to be a pattern and is used to search for
an existing commit by that author (i.e. git rev-list --all -i
--author=<author>); the commit author is then copied from the
first such commit found.
--date=<date>
Override the author date used in the commit.
-m <msg>, --message=<msg>
Use <msg> as the commit message. If multiple -m options are
given, their values are concatenated as separate paragraphs.
The -m option is mutually exclusive with -c, -C, and -F.
-t <file>, --template=<file>
When editing the commit message, start the editor with the
contents in <file>. The commit.template configuration variable
is often used to give this option implicitly to the command.
This mechanism can be used by projects that want to guide
participants with some hints on what to write in the message
in what order. If the user exits the editor without editing
the message, the commit is aborted. This has no effect when a
message is given by other means, e.g. with the -m or -F
options.
-s, --signoff, --no-signoff
Add a Signed-off-by trailer by the committer at the end of the
commit log message. The meaning of a signoff depends on the
project to which you’re committing. For example, it may
certify that the committer has the rights to submit the work
under the project’s license or agrees to some contributor
representation, such as a Developer Certificate of Origin.
(See https://developercertificate.org for the one used by the
Linux kernel and Git projects.) Consult the documentation or
leadership of the project to which you’re contributing to
understand how the signoffs are used in that project.
The --no-signoff option can be used to countermand an earlier
--signoff option on the command line.
--trailer <token>[(=|:)<value>]
Specify a (<token>, <value>) pair that should be applied as a
trailer. (e.g. git commit --trailer "Signed-off-by:C O Mitter
\ <committer@example.com>" --trailer "Helped-by:C O Mitter \
<committer@example.com>" will add the Signed-off-by trailer
and the Helped-by trailer to the commit message.) The
trailer.* configuration variables (git-interpret-trailers(1))
can be used to define if a duplicated trailer is omitted,
where in the run of trailers each trailer would appear, and
other details.
-n, --[no-]verify
Bypass the pre-commit and commit-msg hooks. See also
githooks(5).
--allow-empty
Usually recording a commit that has the exact same tree as its
sole parent commit is a mistake, and the command prevents you
from making such a commit. This option bypasses the safety,
and is primarily for use by foreign SCM interface scripts.
--allow-empty-message
Create a commit with an empty commit message without using
plumbing commands like git-commit-tree(1). Like --allow-empty,
this command is primarily for use by foreign SCM interface
scripts.
--cleanup=<mode>
Determine how the supplied commit message should be cleaned up
before committing. The <mode> can be strip, whitespace,
verbatim, scissors or default.
strip
Strip leading and trailing empty lines, trailing
whitespace, commentary and collapse consecutive empty
lines.
whitespace
Same as strip except #commentary is not removed.
verbatim
Do not change the message at all.
scissors
Same as whitespace except that everything from (and
including) the line found below is truncated, if the
message is to be edited. "#" can be customized with
core.commentChar.
# ------------------------ >8 ------------------------
default
Same as strip if the message is to be edited. Otherwise
whitespace.
The default can be changed by the commit.cleanup configuration
variable (see git-config(1)).
-e, --edit
Let the user further edit the message taken from <file> with
-F <file>, command line with -m <message>, and from <commit>
with -C <commit>.
--no-edit
Use the selected commit message without launching an editor.
For example, git commit --amend --no-edit amends a commit
without changing its commit message.
--amend
Replace the tip of the current branch by creating a new
commit. The recorded tree is prepared as usual (including the
effect of the -i and -o options and explicit pathspec), and
the message from the original commit is used as the starting
point, instead of an empty message, when no other message is
specified from the command line via options such as -m, -F,
-c, etc. The new commit has the same parents and author as the
current one (the --reset-author option can countermand this).
It is a rough equivalent for:
$ git reset --soft HEAD^
$ ... do something else to come up with the right tree ...
$ git commit -c ORIG_HEAD
but can be used to amend a merge commit.
You should understand the implications of rewriting history if
you amend a commit that has already been published. (See the
"RECOVERING FROM UPSTREAM REBASE" section in git-rebase(1).)
--no-post-rewrite
Bypass the post-rewrite hook.
-i, --include
Before making a commit out of staged contents so far, stage
the contents of paths given on the command line as well. This
is usually not what you want unless you are concluding a
conflicted merge.
-o, --only
Make a commit by taking the updated working tree contents of
the paths specified on the command line, disregarding any
contents that have been staged for other paths. This is the
default mode of operation of git commit if any paths are given
on the command line, in which case this option can be omitted.
If this option is specified together with --amend, then no
paths need to be specified, which can be used to amend the
last commit without committing changes that have already been
staged. If used together with --allow-empty paths are also not
required, and an empty commit will be created.
--pathspec-from-file=<file>
Pass pathspec in <file> instead of commandline args. If <file>
is exactly - then standard input is used. Pathspec elements
are separated by LF or CR/LF. Pathspec elements can be quoted
as explained for the configuration variable core.quotePath
(see git-config(1)). See also --pathspec-file-nul and global
--literal-pathspecs.
--pathspec-file-nul
Only meaningful with --pathspec-from-file. Pathspec elements
are separated with NUL character and all other characters are
taken literally (including newlines and quotes).
-u[<mode>], --untracked-files[=<mode>]
Show untracked files.
The <mode> parameter is optional (defaults to all), and is
used to specify the handling of untracked files; when -u is
not used, the default is normal, i.e. show untracked files and
directories.
The possible options are:
no
Show no untracked files
normal
Shows untracked files and directories
all
Also shows individual files in untracked directories.
All usual spellings for Boolean value true are taken as normal
and false as no. The default can be changed using the
status.showUntrackedFiles configuration variable documented in
git-config(1).
-v, --verbose
Show unified diff between the HEAD commit and what would be
committed at the bottom of the commit message template to help
the user describe the commit by reminding what changes the
commit has. Note that this diff output doesn’t have its lines
prefixed with #. This diff will not be a part of the commit
message. See the commit.verbose configuration variable in
git-config(1).
If specified twice, show in addition the unified diff between
what would be committed and the worktree files, i.e. the
unstaged changes to tracked files.
-q, --quiet
Suppress commit summary message.
--dry-run
Do not create a commit, but show a list of paths that are to
be committed, paths with local changes that will be left
uncommitted and paths that are untracked.
--status
Include the output of git-status(1) in the commit message
template when using an editor to prepare the commit message.
Defaults to on, but can be used to override configuration
variable commit.status.
--no-status
Do not include the output of git-status(1) in the commit
message template when using an editor to prepare the default
commit message.
-S[<key-id>], --gpg-sign[=<key-id>], --no-gpg-sign
GPG-sign commits. The <key-id> is optional and defaults to the
committer identity; if specified, it must be stuck to the
option without a space. --no-gpg-sign is useful to
countermand both commit.gpgSign configuration variable, and
earlier --gpg-sign.
--
Do not interpret any more arguments as options.
<pathspec>...
When <pathspec> is given on the command line, commit the
contents of the files that match the pathspec without
recording the changes already added to the index. The contents
of these files are also staged for the next commit on top of
what have been staged before.
For more details, see the pathspec entry in gitglossary(7).
When recording your own work, the contents of modified files in
your working tree are temporarily stored to a staging area called
the "index" with git add. A file can be reverted back, only in the
index but not in the working tree, to that of the last commit with
git restore --staged <file>, which effectively reverts git add and
prevents the changes to this file from participating in the next
commit. After building the state to be committed incrementally
with these commands, git commit (without any pathname parameter)
is used to record what has been staged so far. This is the most
basic form of the command. An example:
$ edit hello.c
$ git rm goodbye.c
$ git add hello.c
$ git commit
Instead of staging files after each individual change, you can
tell git commit to notice the changes to the files whose contents
are tracked in your working tree and do corresponding git add and
git rm for you. That is, this example does the same as the earlier
example if there is no other change in your working tree:
$ edit hello.c
$ rm goodbye.c
$ git commit -a
The command git commit -a first looks at your working tree,
notices that you have modified hello.c and removed goodbye.c, and
performs necessary git add and git rm for you.
After staging changes to many files, you can alter the order the
changes are recorded in, by giving pathnames to git commit. When
pathnames are given, the command makes a commit that only records
the changes made to the named paths:
$ edit hello.c hello.h
$ git add hello.c hello.h
$ edit Makefile
$ git commit Makefile
This makes a commit that records the modification to Makefile. The
changes staged for hello.c and hello.h are not included in the
resulting commit. However, their changes are not lost — they are
still staged and merely held back. After the above sequence, if
you do:
$ git commit
this second commit would record the changes to hello.c and hello.h
as expected.
After a merge (initiated by git merge or git pull) stops because
of conflicts, cleanly merged paths are already staged to be
committed for you, and paths that conflicted are left in unmerged
state. You would have to first check which paths are conflicting
with git status and after fixing them manually in your working
tree, you would stage the result as usual with git add:
$ git status | grep unmerged
unmerged: hello.c
$ edit hello.c
$ git add hello.c
After resolving conflicts and staging the result, git ls-files -u
would stop mentioning the conflicted path. When you are done, run
git commit to finally record the merge:
$ git commit
As with the case to record your own changes, you can use -a option
to save typing. One difference is that during a merge resolution,
you cannot use git commit with pathnames to alter the order the
changes are committed, because the merge should be recorded as a
single commit. In fact, the command refuses to run when given
pathnames (but see -i option).
Author and committer information is taken from the following
environment variables, if set:
• GIT_AUTHOR_NAME
• GIT_AUTHOR_EMAIL
• GIT_AUTHOR_DATE
• GIT_COMMITTER_NAME
• GIT_COMMITTER_EMAIL
• GIT_COMMITTER_DATE
(nb "<", ">" and "\n"s are stripped)
The author and committer names are by convention some form of a
personal name (that is, the name by which other humans refer to
you), although Git does not enforce or require any particular
form. Arbitrary Unicode may be used, subject to the constraints
listed above. This name has no effect on authentication; for that,
see the credential.username variable in git-config(1).
In case (some of) these environment variables are not set, the
information is taken from the configuration items user.name and
user.email, or, if not present, the environment variable EMAIL,
or, if that is not set, system user name and the hostname used for
outgoing mail (taken from /etc/mailname and falling back to the
fully qualified hostname when that file does not exist).
The author.name and committer.name and their corresponding email
options override user.name and user.email if set and are
overridden themselves by the environment variables.
The typical usage is to set just the user.name and user.email
variables; the other options are provided for more complex use
cases.
The GIT_AUTHOR_DATE and GIT_COMMITTER_DATE environment variables
support the following date formats:
Git internal format
It is <unix-timestamp> <time-zone-offset>, where
<unix-timestamp> is the number of seconds since the UNIX
epoch. <time-zone-offset> is a positive or negative offset
from UTC. For example CET (which is 1 hour ahead of UTC) is
+0100.
RFC 2822
The standard date format as described by RFC 2822, for example
Thu, 07 Apr 2005 22:13:13 +0200.
ISO 8601
Time and date specified by the ISO 8601 standard, for example
2005-04-07T22:13:13. The parser accepts a space instead of the
T character as well. Fractional parts of a second will be
ignored, for example 2005-04-07T22:13:13.019 will be treated
as 2005-04-07T22:13:13.
Note
In addition, the date part is accepted in the following
formats: YYYY.MM.DD, MM/DD/YYYY and DD.MM.YYYY.
In addition to recognizing all date formats above, the --date
option will also try to make sense of other, more human-centric
date formats, such as relative dates like "yesterday" or "last
Friday at noon".
Though not required, it’s a good idea to begin the commit message
with a single short (no more than 50 characters) line summarizing
the change, followed by a blank line and then a more thorough
description. The text up to the first blank line in a commit
message is treated as the commit title, and that title is used
throughout Git. For example, git-format-patch(1) turns a commit
into email, and it uses the title on the Subject line and the rest
of the commit in the body.
Git is to some extent character encoding agnostic.
• The contents of the blob objects are uninterpreted sequences
of bytes. There is no encoding translation at the core level.
• Path names are encoded in UTF-8 normalization form C. This
applies to tree objects, the index file, ref names, as well as
path names in command line arguments, environment variables
and config files (.git/config (see git-config(1)),
gitignore(5), gitattributes(5) and gitmodules(5)).
Note that Git at the core level treats path names simply as
sequences of non-NUL bytes, there are no path name encoding
conversions (except on Mac and Windows). Therefore, using
non-ASCII path names will mostly work even on platforms and
file systems that use legacy extended ASCII encodings.
However, repositories created on such systems will not work
properly on UTF-8-based systems (e.g. Linux, Mac, Windows) and
vice versa. Additionally, many Git-based tools simply assume
path names to be UTF-8 and will fail to display other
encodings correctly.
• Commit log messages are typically encoded in UTF-8, but other
extended ASCII encodings are also supported. This includes
ISO-8859-x, CP125x and many others, but not UTF-16/32, EBCDIC
and CJK multi-byte encodings (GBK, Shift-JIS, Big5, EUC-x,
CP9xx etc.).
Although we encourage that the commit log messages are encoded in
UTF-8, both the core and Git Porcelain are designed not to force
UTF-8 on projects. If all participants of a particular project
find it more convenient to use legacy encodings, Git does not
forbid it. However, there are a few things to keep in mind.
1. git commit and git commit-tree issue a warning if the commit
log message given to it does not look like a valid UTF-8
string, unless you explicitly say your project uses a legacy
encoding. The way to say this is to have i18n.commitEncoding
in .git/config file, like this:
[i18n]
commitEncoding = ISO-8859-1
Commit objects created with the above setting record the value
of i18n.commitEncoding in their encoding header. This is to
help other people who look at them later. Lack of this header
implies that the commit log message is encoded in UTF-8.
2. git log, git show, git blame and friends look at the encoding
header of a commit object, and try to re-code the log message
into UTF-8 unless otherwise specified. You can specify the
desired output encoding with i18n.logOutputEncoding in
.git/config file, like this:
[i18n]
logOutputEncoding = ISO-8859-1
If you do not have this configuration variable, the value of
i18n.commitEncoding is used instead.
Note that we deliberately chose not to re-code the commit log
message when a commit is made to force UTF-8 at the commit object
level, because re-coding to UTF-8 is not necessarily a reversible
operation.
The editor used to edit the commit log message will be chosen from
the GIT_EDITOR environment variable, the core.editor configuration
variable, the VISUAL environment variable, or the EDITOR
environment variable (in that order). See git-var(1) for details.
Everything above this line in this section isn’t included from the
git-config(1) documentation. The content that follows is the same
as what’s found there:
commit.cleanup
This setting overrides the default of the --cleanup option in
git commit. Changing the default can be useful when you always
want to keep lines that begin with the comment character # in
your log message, in which case you would do git config
commit.cleanup whitespace (note that you will have to remove
the help lines that begin with # in the commit log template
yourself, if you do this).
commit.gpgSign
A boolean to specify whether all commits should be GPG signed.
Use of this option when doing operations such as rebase can
result in a large number of commits being signed. It may be
convenient to use an agent to avoid typing your GPG passphrase
several times.
commit.status
A boolean to enable/disable inclusion of status information in
the commit message template when using an editor to prepare
the commit message. Defaults to true.
commit.template
Specify the pathname of a file to use as the template for new
commit messages.
commit.verbose
A boolean or int to specify the level of verbosity with git
commit.
This command can run commit-msg, prepare-commit-msg, pre-commit,
post-commit and post-rewrite hooks. See githooks(5) for more
information.
$GIT_DIR/COMMIT_EDITMSG
This file contains the commit message of a commit in progress.
If git commit exits due to an error before creating a commit,
any commit message that has been provided by the user (e.g.,
in an editor session) will be available in this file, but will
be overwritten by the next invocation of git commit.
git-add(1), git-rm(1), git-mv(1), git-merge(1), git-commit-tree(1)
Part of the git(1) suite
This page is part of the git (Git distributed version control
system) project. Information about the project can be found at
⟨http://git-scm.com/⟩. If you have a bug report for this manual
page, see ⟨http://git-scm.com/community⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/git/git.git⟩ on 2025-02-02. (At that time,
the date of the most recent commit that was found in the
repository was 2025-01-31.) If you discover any rendering
problems in this HTML version of the page, or you believe there is
a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Git 2.48.1.166.g58b580 2025-01-31 GIT-COMMIT(1)
Pages that refer to this page: git(1), git-add(1), git-am(1), git-cherry-pick(1), git-commit-tree(1), git-config(1), git-format-patch(1), git-interpret-trailers(1), git-merge(1), git-notes(1), git-pull(1), git-rebase(1), git-replace(1), git-reset(1), git-revert(1), git-stash(1), git-svn(1), stg-email(1), stg-repair(1), githooks(5), giteveryday(7)
|
HTML rendering created 2025-02-02 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|